Intermediate Unit 6 at AA Projects Review 2010

Thank you to all of the students for putting together such a great show!
Have a great Summer!

See the online portfolio here!

painful playful plywood profile

Hi

we are on schedule for the project review exhibition.

and Im very appreciated of all yours good efforts and it goes to the grand finalle

tomorrow we will have final installation.

the final touch needs all participations by all of us

best

and don't forget to bring the camouflage book ^^

boss

Drawing Arrangement update

Version 1

Version 2

Following today's discussion, I had some updates for the drawing arrangement.

I've changed the scale of each drawing according to the profile grid.

I've taken drawing at very low position away.

And sorry Jonathan since I don't think the perspective way to put drawings will work also it will be a bit strange when look at them from the front, I would still prefer to put drawings in a normal way.

Here is a question for Antoine and Royce. Is that possible to change you two's model position so that all Antoine's drawings can be put together as showed in Version 2? Otherwise I'll use Version 1.

Exhibition Drawing Arrangement

This is the newest version of drawing arrangement. Basically I've tried to move relavent drawings to each model. The top line of drawings is aligned with the top of profile. Lables will be located beside each drawing.

Small prints at the corner position will be decided later(if you have any more good renderings/photos/diagrams please send me ASAP). Angle of drawings will be updated later as well.

We finally decide to print on 160g paper. And we've tried to mount drawings on cheap brown card board as well as white foam board. Samples will be showed in Sunday's meeting.

In terms of hanging small prints, I'll make 2 versions with fish wires. Also can be seen on Sunday.

Everyone's foil model will be put near their fragment to have a better connected story.

Comments are strongly welcome!!!

exhibition plan and elevation

these are the drawing for the window opening on the long wall

kit and chen and ula can refer the elevation for the coordination of drawing the rhino file will be sent via yousendit soon.

Thanks

Jin

exhibition proposal

Turnel of Camouflage

the wall area(especially corner) will have denser profile than near the diagonal border
to enhance perspective.

number of layer(profile) : 22
max gap distance : app 400~500mm
min gap distance : app 110~150mm

the beginning has 2m width openning the end is 1.4m

some huge wall will be remain as a flat wall for the drawing and other works at the opposite corner and just next to entrance too.

from the inner corner to entrance right side will be filled with inter 12 works

refer attatched rhino file.

this is very draft.. regarding material and fabrication the proposal could be refined

pls comment.

and we are looking forward to going Hookpark next week.

Thanks